In March of 2003, Congressman John Conyers Jr. out of Michigan introduced a bill to Congress called the United States Toxic Mold Safety and Protection Act.
This Bill says that the Centers for Disease Control and the Environmental Protection agency will be responsible for examining the effects of different kinds of mold on the health of human beings and they will research and develop more accurate results of the serious problems that are presented by the presence of mold in human habitats.
This Bill will also direct the Department of Housing and Urban Development and the Environmental Protection Agency to establish a certain number of items that will constitute the conditions that will cause mold to grow indoors and will outline what can be done in order to inhibit this growth. These guidelines will not only address the causes of mold growth and what can be done to prevent it, but also the inspection, testing, and remediation techniques.
The Bill also says that you could receive tax credits for the inspection and/or removal and remediation of any mold in the home or business.
Grants will be given for the removal of mold in any and all buildings accessible by the public.
It also will create what it calls a National Toxic Mold Insurance Program that will be administered by FEMA (the Federal Emergency Management Agency) in order to protect home and business owners from any crippling financial losses, because most insurance companies do not provide insurance for mold at all or what they do provide is inadequate.
It will also necessitate the modification of building codes in local areas in order to keep the risk of mold infections in newly built homes and other buildings down.
This bill will also require mold inspections for apartment complexes and any other multi-unit residential property. Public housing is also subject to these mandatory mold inspections.
Victims of mold health complications will also be covered by Medicaid if they do not have any other health care in place at the time.
It has also authorized the establishment of different public information programs that will educate the public about the hazards of mold that is allowed to grow indoors. It is believed that an educated public is better prepared to defend itself against these hazards.
For more information, please visit http://www.house.gov/conyers/mold.htm . If you support this bill, please contact your congressman.
Thursday, January 31, 2008
Fixing A Water Damaged Laptop
You might not it, but the circuit board in your laptop and any other electronic items in your house were rinsed in clean water and dried before they were put into use? As long as the water is clean, the device will not be irreparably damaged. If something is allowed to soak in dirty water, however, with different particles and other mineral content, then the device will become damaged.
If you have a laptop that has gotten wet, the first thing to do is to turn it off immediately and remove all sources of power from it including the A/C adapter and batteries. Set these aside while you take the laptop and turn it upside down. This will stop any more liquid from seeping further into the computer.
After you do that, use paper towels or a rag to mop up the liquid that was spilled, wipe the liquid off the keyboard and the outside. Also wipe down anything else electronic nearby that got wet, too, like an external CD-ROM or external hard drive.
Disassemble the laptop (take a look at your user’s manual, too) and allow the insides to air out for at least a full day. Most people who have gone through this procedure recommend longer, especially if the liquid got further down into the computer. The best thing to do is let it sit and dry until you are confident that the interior is completely moisture-free.
If the only liquid it came into contact with was water out of your faucet, then allowing it to dry should be all that is necessary, but if it was something like soda, tea, or coffee that was spilled onto it, then you will want to clean it with some rubbing alcohol. You can use cotton swabs for this. Do not apply any heat to the device while you are cleaning it with alcohol and wait until the smell of alcohol is completely gone before you try to power it up.
Put the device back together after you are finished letting it dry or cleaning it up. Reattach the battery and see if it powers on. If it does, wait and see if it starts up as it should. If it does not, then attach the A/C adapter and plug it up. If you can turn the device on after trying this, then all you should need is a new battery. This should be pretty easy to obtain, as long as you have the money to purchase it with, either from the manufacturer or from a site like eBay.
If you have a laptop that has gotten wet, the first thing to do is to turn it off immediately and remove all sources of power from it including the A/C adapter and batteries. Set these aside while you take the laptop and turn it upside down. This will stop any more liquid from seeping further into the computer.
After you do that, use paper towels or a rag to mop up the liquid that was spilled, wipe the liquid off the keyboard and the outside. Also wipe down anything else electronic nearby that got wet, too, like an external CD-ROM or external hard drive.
Disassemble the laptop (take a look at your user’s manual, too) and allow the insides to air out for at least a full day. Most people who have gone through this procedure recommend longer, especially if the liquid got further down into the computer. The best thing to do is let it sit and dry until you are confident that the interior is completely moisture-free.
If the only liquid it came into contact with was water out of your faucet, then allowing it to dry should be all that is necessary, but if it was something like soda, tea, or coffee that was spilled onto it, then you will want to clean it with some rubbing alcohol. You can use cotton swabs for this. Do not apply any heat to the device while you are cleaning it with alcohol and wait until the smell of alcohol is completely gone before you try to power it up.
Put the device back together after you are finished letting it dry or cleaning it up. Reattach the battery and see if it powers on. If it does, wait and see if it starts up as it should. If it does not, then attach the A/C adapter and plug it up. If you can turn the device on after trying this, then all you should need is a new battery. This should be pretty easy to obtain, as long as you have the money to purchase it with, either from the manufacturer or from a site like eBay.
The Three Ways Mold Affects Us
Mold has been around since before us and has been having an effect on us since the time of Moses, yet we have only recently begun to see the true effects of mold on the human body. Mold not only affects the human body, but also the bodies of animals, such as our dogs, cats, and even our birds. We have become aware that mold is not something that we want living where we do, but a lot of us do not feel that there is much that we can do about it. Most molds fit into three different categories and are classified according to what kind of effect they have on us and our health.
Molds that are considered toxic produce what are called mycotoxins and even though these molds rarely occur where we live, they can cause all kinds of health complications and some of these can lead to death in the most serious of circumstances. Penicilliosis is native to the region of Southeast Asia and has a fairly high mortality rate without treatment, but even with treatment the number of deaths total about one in five. Another serious occurrence associated with mold is called aspergilloma and it happens when fungus begins to grow in balls inside any cavities existing in the body, particularly the lungs. Stachybotrys mold produces mycotoxins and is the most famous of the different black molds that exist and has been referenced by the media as “toxic black mold”.
Allergenic molds seem to affect people the most often and as their name implies, they usually cause some common allergy symptoms, but can be quite a nuisance. They can aggravate existing allergies or asthma, making the symptoms that a person already has become worse over time. Anti-histamines may help a small amount, but getting rid of the contamination is usually the only way to keep the symptoms from returning.
Pathogenic molds are less rare than toxic molds or allergenic molds, but they can be just as dangerous in people that have compromised immune systems such as those who are HIV-positive or has AIDS, cancer, or is recovering from surgery of any kind. The elderly, pets, and small children are also more at risk than a normal healthy adult person would be.
If you believe that mold exists in your home, you should perform some do-it-yourself mold tests and when you get the results back, hire a professional to get rid of the infestation as soon as possible.
Molds that are considered toxic produce what are called mycotoxins and even though these molds rarely occur where we live, they can cause all kinds of health complications and some of these can lead to death in the most serious of circumstances. Penicilliosis is native to the region of Southeast Asia and has a fairly high mortality rate without treatment, but even with treatment the number of deaths total about one in five. Another serious occurrence associated with mold is called aspergilloma and it happens when fungus begins to grow in balls inside any cavities existing in the body, particularly the lungs. Stachybotrys mold produces mycotoxins and is the most famous of the different black molds that exist and has been referenced by the media as “toxic black mold”.
Allergenic molds seem to affect people the most often and as their name implies, they usually cause some common allergy symptoms, but can be quite a nuisance. They can aggravate existing allergies or asthma, making the symptoms that a person already has become worse over time. Anti-histamines may help a small amount, but getting rid of the contamination is usually the only way to keep the symptoms from returning.
Pathogenic molds are less rare than toxic molds or allergenic molds, but they can be just as dangerous in people that have compromised immune systems such as those who are HIV-positive or has AIDS, cancer, or is recovering from surgery of any kind. The elderly, pets, and small children are also more at risk than a normal healthy adult person would be.
If you believe that mold exists in your home, you should perform some do-it-yourself mold tests and when you get the results back, hire a professional to get rid of the infestation as soon as possible.
Mold In The Time Of Moses
If your insurance adjuster claims that mold has been around for many years longer than we have and that it does not to the damage that the media and health community say that it does, then perhaps something you should have them read up on is a verse that comes straight out of the Bible and blatantly talks about homes that are diseased.
It is called a “leprous plague” in the scripture Leviticus 14:34; it appears growing on the walls and if a family went to the priest and said “my house is diseased”, it was ordered that the people leave the house so the priest could go in and examine it. If it was determined to be diseased, then the stones of the house were to be removed and taken to a place that was away from town and from where people resided so that others would be safe from the plague. Stones were brought in to replace the ones that were removed and it was watched to see if the mold returned; if it did return, the entire house was torn down and all the debris was taken to where the first stones were dumped.
Mold was serious business in Biblical times just as it is today, but back then there were no formal antibiotics or fungicides to help get rid of the mold either in the body or on a person’s property, so most of the time it simply had to be torn down and replaced. Even the deaths of the firstborns of Egypt are sometimes attributed by scholars to the presence of mold on the food that was stored underground after the locusts came. If the food was contaminated with almost any mold, especially Stachybotrys atra, it is speculated that it would have been what killed all the firstborn children in Egypt at the time because during that period, it was customary for the eldest Egyptian child in a family to receive a second portion of food. Food that has been stored underground, especially if it was stored directly on top of the soil, would have been a perfect food also for mold. The Jews alive at the time would not have suffered from this plague because they ate herbs, lamb, and unleavened bread, which should have been safe from any mold contamination.
So, do not let your insurance adjuster fool you by trying to downplay the seriousness of mold. It was serious over 2,000 years ago and it is just as serious today.
It is called a “leprous plague” in the scripture Leviticus 14:34; it appears growing on the walls and if a family went to the priest and said “my house is diseased”, it was ordered that the people leave the house so the priest could go in and examine it. If it was determined to be diseased, then the stones of the house were to be removed and taken to a place that was away from town and from where people resided so that others would be safe from the plague. Stones were brought in to replace the ones that were removed and it was watched to see if the mold returned; if it did return, the entire house was torn down and all the debris was taken to where the first stones were dumped.
Mold was serious business in Biblical times just as it is today, but back then there were no formal antibiotics or fungicides to help get rid of the mold either in the body or on a person’s property, so most of the time it simply had to be torn down and replaced. Even the deaths of the firstborns of Egypt are sometimes attributed by scholars to the presence of mold on the food that was stored underground after the locusts came. If the food was contaminated with almost any mold, especially Stachybotrys atra, it is speculated that it would have been what killed all the firstborn children in Egypt at the time because during that period, it was customary for the eldest Egyptian child in a family to receive a second portion of food. Food that has been stored underground, especially if it was stored directly on top of the soil, would have been a perfect food also for mold. The Jews alive at the time would not have suffered from this plague because they ate herbs, lamb, and unleavened bread, which should have been safe from any mold contamination.
So, do not let your insurance adjuster fool you by trying to downplay the seriousness of mold. It was serious over 2,000 years ago and it is just as serious today.
How To Keep Mold Out Of Your Life And Off Of Your Property
Mold gets onto just about everything that we own at some point or another; it is whether or not the mold starts to actually grow on the item and stay there that tends to be the problem. Whether it is clothes, furniture, walls, floors, clothes, or food, mold can do quite a lot of damage to the things in our home and we cannot always see it coming. Even the items that we need to be clean the most, like our baby’s bottles that they drink their milk and juice out of.
The bottles that we have today are not just the cylinders that they used to be; sometimes they come in strange shapes that are hard to get completely dry and when this happens and they are put back into the refrigerator, they can often become moldy. How can you prevent this? All you have to do after you wash them is dry them inside the best that you can and then simply put them in the freezer until you are ready to use them again. Mold does not like these temperatures and this will inhibit any growth. It is a popular thing to put kitchen staples like flour, sugar, and cornmeal into the freezer to protect them from bugs and mice, so why not use this to your advantage to prevent mold, as well?
Mold also likes to grow on clothes that have been forgotten about in the backs of closets. Try not to pack your closets so full of clothes that air cannot circulate. The clothes being packed so close together creates the warmth that the mold needs to survive and if your house is humid enough, the moisture it needs is also there. The last thing mold needs to live is food and your clothing is more than enough to supply that need. It might also be a good idea to install a vent into the closet to help air circulate a little better, too.
Something else that causes mold to grow is when you throw damp and dirty clothing into a bathroom closet and leave it there. This is particularly a bad idea if you have carpet in it. Carpet in the bathroom is a bad idea all by itself, but when you couple it with dirty, wet clothes or towels, you are asking for a mold infestation to start in the back of your closet. The solution for this is to use a plastic laundry hamper and to empty it regularly, which should be around every day and a half. Mold usually starts to grow after about 48 hours.
The bottles that we have today are not just the cylinders that they used to be; sometimes they come in strange shapes that are hard to get completely dry and when this happens and they are put back into the refrigerator, they can often become moldy. How can you prevent this? All you have to do after you wash them is dry them inside the best that you can and then simply put them in the freezer until you are ready to use them again. Mold does not like these temperatures and this will inhibit any growth. It is a popular thing to put kitchen staples like flour, sugar, and cornmeal into the freezer to protect them from bugs and mice, so why not use this to your advantage to prevent mold, as well?
Mold also likes to grow on clothes that have been forgotten about in the backs of closets. Try not to pack your closets so full of clothes that air cannot circulate. The clothes being packed so close together creates the warmth that the mold needs to survive and if your house is humid enough, the moisture it needs is also there. The last thing mold needs to live is food and your clothing is more than enough to supply that need. It might also be a good idea to install a vent into the closet to help air circulate a little better, too.
Something else that causes mold to grow is when you throw damp and dirty clothing into a bathroom closet and leave it there. This is particularly a bad idea if you have carpet in it. Carpet in the bathroom is a bad idea all by itself, but when you couple it with dirty, wet clothes or towels, you are asking for a mold infestation to start in the back of your closet. The solution for this is to use a plastic laundry hamper and to empty it regularly, which should be around every day and a half. Mold usually starts to grow after about 48 hours.
Important Steps On How To Avoid Water Damage To Your Home
Water damage is one of the worst things that can happen to your home that you can almost completely prevent, unless it is caused by mother nature. Floods and hurricanes are something that we can’t really prevent; all we can do is just try to prepare for it and often our preparations aren’t good enough. We should not feel bad about this, however, because nature will almost always win over any preparations that we make to try and keep her out of our homes. There are a few things that you can do to prevent water damage to your home on a smaller scale, but you will have to be diligent in your efforts if you are truly going to make it work.
Pay attention to your water heater. This and anything else in your house that uses a large amount of water is at risk of leaking out onto the floor and doing some serious damage. It should always be installed on the lowest level of your home, preferably in the basement raised up off the floor and sitting on a drain pan that is connected to a water drain in the floor. This will make sure that even if your water heater does start to leak, the water goes back into the sewer or your septic tank instead of onto your floor.
If you are worried about your dishwasher leaking, check the pipes and hoses that are leading to it first and make sure they are connected tightly and are not cracked anywhere. If you are buying a home that comes with a dishwasher already installed, you will want to check around the base of it to check for water damage. If the floor around it is discolored or if the base of the cabinet near it is warped, you might have a leaky dishwasher.
One thing that most homeowners have to do at least once a year is cleaning out the gutters that run around the roof and drain the water from the roof, through the downspout, and away from the house. These always end up collecting leaves, sticks, and other debris and if the gutters become clogged with this material, it will cause water to simply drop off the roof to the base of your house. If water saturates the ground at your home’s foundation, it will eventually cause it to sink into the ground.
Pay attention to your water heater. This and anything else in your house that uses a large amount of water is at risk of leaking out onto the floor and doing some serious damage. It should always be installed on the lowest level of your home, preferably in the basement raised up off the floor and sitting on a drain pan that is connected to a water drain in the floor. This will make sure that even if your water heater does start to leak, the water goes back into the sewer or your septic tank instead of onto your floor.
If you are worried about your dishwasher leaking, check the pipes and hoses that are leading to it first and make sure they are connected tightly and are not cracked anywhere. If you are buying a home that comes with a dishwasher already installed, you will want to check around the base of it to check for water damage. If the floor around it is discolored or if the base of the cabinet near it is warped, you might have a leaky dishwasher.
One thing that most homeowners have to do at least once a year is cleaning out the gutters that run around the roof and drain the water from the roof, through the downspout, and away from the house. These always end up collecting leaves, sticks, and other debris and if the gutters become clogged with this material, it will cause water to simply drop off the roof to the base of your house. If water saturates the ground at your home’s foundation, it will eventually cause it to sink into the ground.
Employer Concerns About Mold And The Options
One of the places that we don’t usually think of when we think of mold is our working environment. We usually think that we’ll find it in our homes, but other buildings are just as susceptible. If you are responsible for a number of employees and you suspect that there might be a mold infestation in your building, the first thing that you need to do is mold testing yourself and finding out if there truly is an infection of mold on the premises. Send off the mold samples to a laboratory that specializes in the identification of mold and you should receive your results back in a couple of weeks.
If you find that there is truly a mold infestation on your property, then the best thing that you can do for all concerned is to notify your employees that there is a problem. Call in an inspector so that they can determine just how extensive the contamination is and after they have given some professional advice, you should tell your employees that they are laid off until the contamination is taken care of. They should be informed of when the mold remediation will begin and the approximate date that it will end.
Inform your employees also that if they have been experiencing any health complications since they started working for you such as respiratory problems, skin rashes, or anything else that might be attributed to the presence of mold in the building.
Take care of the mold problem in your building as soon as possible; you do not want to be held responsible for the medical bills of your employees if they are diagnosed as having a condition caused by the mold they were exposed to while they were working for you. Not only will you be liable for the medical bills, but you will also probably be liable for their loss of income until they can return to work.
The contamination of your building should never be ignored, whether it is your home or your workplace, because even if you can afford to pay for the medical bills of others, you do not want this affecting your own health. It is truly not worth it to risk the health of others along with your own in order to try and save some money. Have the mold removed as soon as possible.
If you find that there is truly a mold infestation on your property, then the best thing that you can do for all concerned is to notify your employees that there is a problem. Call in an inspector so that they can determine just how extensive the contamination is and after they have given some professional advice, you should tell your employees that they are laid off until the contamination is taken care of. They should be informed of when the mold remediation will begin and the approximate date that it will end.
Inform your employees also that if they have been experiencing any health complications since they started working for you such as respiratory problems, skin rashes, or anything else that might be attributed to the presence of mold in the building.
Take care of the mold problem in your building as soon as possible; you do not want to be held responsible for the medical bills of your employees if they are diagnosed as having a condition caused by the mold they were exposed to while they were working for you. Not only will you be liable for the medical bills, but you will also probably be liable for their loss of income until they can return to work.
The contamination of your building should never be ignored, whether it is your home or your workplace, because even if you can afford to pay for the medical bills of others, you do not want this affecting your own health. It is truly not worth it to risk the health of others along with your own in order to try and save some money. Have the mold removed as soon as possible.
Personal Protective Equipment for Mold Repair Jobs
When you are needing to kill and remove mold from your household, you will want and need equipment that will both make the job easier and help protect you from the dangers of mold exposure. You might feel as though you have been exposed to the mold living in your home for quite a while now and that it probably will not do you much more damage to just go through the remediation without any safety equipment, but you will be wrong about that. The mold spores in your home have not been stirred up nearly as much as they are about to be and if you are planning on performing any invasive procedures in order to get rid of the mold in your walls or in your ceiling, then the mold spore levels in your home’s air will absolutely skyrocket.
One of the first things you are going to want to purchase is a respirator of some kind. There are about three different general types that you can purchase and the respirator is the most important piece of equipment that you can buy for a mold remediation job. This is because the mold spores are in the very air that you breathe and even though gloves and protective clothing are also important, you have a fair amount of control of whether or not the mold comes into direct contact with your skin. Unless you have an allergy to the mold and require that it not get on your skin, the respirator is most important. However, if you have an allergy to mold, you should not be doing this job yourself in the first place.
An N-95 respirator is the basic respirator you will want if you are not planning on tearing apart any drywall or contaminated wallpaper. This will block about 95 percent of mold spores, dirt, and etcetera from entering your respiratory system.
If you want an extra level of protection, consider getting a half or even full-faced air purifying respirator. The good thing about these is that they do not require any training like the next level of respirator will.
Powered air purifying respirators require training and must be used following the regulations of OSHA.
Protective clothing should also be worn during the job. This can include a protective body suit, rubber gloves, and shoe coverings will be necessary, preferably made of a breathable material such as TYVEK. You should purchase a roll of tape, such as masking or duct tape, and wrap it around your wrists and ankles where there are gaps in your protective suit.
One of the first things you are going to want to purchase is a respirator of some kind. There are about three different general types that you can purchase and the respirator is the most important piece of equipment that you can buy for a mold remediation job. This is because the mold spores are in the very air that you breathe and even though gloves and protective clothing are also important, you have a fair amount of control of whether or not the mold comes into direct contact with your skin. Unless you have an allergy to the mold and require that it not get on your skin, the respirator is most important. However, if you have an allergy to mold, you should not be doing this job yourself in the first place.
An N-95 respirator is the basic respirator you will want if you are not planning on tearing apart any drywall or contaminated wallpaper. This will block about 95 percent of mold spores, dirt, and etcetera from entering your respiratory system.
If you want an extra level of protection, consider getting a half or even full-faced air purifying respirator. The good thing about these is that they do not require any training like the next level of respirator will.
Powered air purifying respirators require training and must be used following the regulations of OSHA.
Protective clothing should also be worn during the job. This can include a protective body suit, rubber gloves, and shoe coverings will be necessary, preferably made of a breathable material such as TYVEK. You should purchase a roll of tape, such as masking or duct tape, and wrap it around your wrists and ankles where there are gaps in your protective suit.
Mold Remediation Respirators
When you are working on killing or removing the mold from a building, the equipment that you will need to safely do this job can vary just a bit, depending on the size of the area you are trying to treat. You might just need some cloths, mold killing chemicals, rubber gloves, and a light respirator if it is just a surface infection like on a countertop or on a vinyl floor. But, if you are planning on tearing out any drywall and getting to an infection that exists inside your walls or ceiling, then you will need some protection equipment that is just a bit more extensive. There are different levels of protection equipment just as there are different levels of mold infestations and there are a few things that you need to know about respirators.
No matter what level mold infestation you are dealing with getting rid of, you will need an N-95 type respirator. This is about the minimum level of protection that you can use and the next level down would be using none at all; this is, of course not advised. When you are cleaning, mold spores are stirred up into the air, especially if you are taking out drywall or removing contaminated wallpaper, so even if you have been living in a contaminated household for a while, the risk you are taking by not using a respirator when you are getting rid of it is considerable. You can find this kind of respirator in most hardware and even some department stores.
Air purifying respirators are the next step up in protection and these always have HEPA filters in them. These filter out almost all particles that you are breathing in while you are working. This kind of respirator does not protect your eyes and are available in half face and full face kinds. The best thing about this kind of respirator is not only the HEPA filter, but also the fact that using this kind does not require any training. The next step in protection does.
The highest level of breathing protection will come from a powered air purifying respirator. These also come equipped with HEPA filters, but require electricity and some training in order to be able to use them. OSHA guidelines must also be followed to the letter if you are planning on using these respirators in a commercial setting.
All respirators must be approved for usage by the National Institute for Occupational Safety and Health.
No matter what level mold infestation you are dealing with getting rid of, you will need an N-95 type respirator. This is about the minimum level of protection that you can use and the next level down would be using none at all; this is, of course not advised. When you are cleaning, mold spores are stirred up into the air, especially if you are taking out drywall or removing contaminated wallpaper, so even if you have been living in a contaminated household for a while, the risk you are taking by not using a respirator when you are getting rid of it is considerable. You can find this kind of respirator in most hardware and even some department stores.
Air purifying respirators are the next step up in protection and these always have HEPA filters in them. These filter out almost all particles that you are breathing in while you are working. This kind of respirator does not protect your eyes and are available in half face and full face kinds. The best thing about this kind of respirator is not only the HEPA filter, but also the fact that using this kind does not require any training. The next step in protection does.
The highest level of breathing protection will come from a powered air purifying respirator. These also come equipped with HEPA filters, but require electricity and some training in order to be able to use them. OSHA guidelines must also be followed to the letter if you are planning on using these respirators in a commercial setting.
All respirators must be approved for usage by the National Institute for Occupational Safety and Health.
Killer Molds in the Desert
It might not have occurred to you, but mold can exist even in some of the hottest climates, such as parts of the southwestern United States. Just because this mold can exist there, however, does not mean that it is not a danger to human beings. People who live in the deserts of the southwestern U.S. might not think that they are in any danger from mold due to the high temperatures and lack of rain, but the fact is that these areas are in just as much danger of mold and water damage as areas that get more rain and have more life-friendly temperatures.
Coccidioides simmitis is a dangerous mold that lives in the western deserts of the United States and causes what has become known as “Valley Fever”. This is a skin disease that can lead to death if it is left untreated for long enough and while this mold is located in the deserts of the southwestern United States and even Mexico, it is oddly absent from the deserts of other continents such as Asia, Africa, and Australia.
The reason that mold damage can be a huge problem in areas of desert such as those of Arizona and New Mexico is that residents sometimes use “swamp heaters” to cool down their homes and offices during the most hot and dry parts of the year. Unfortunately, the downside to these will cause the indoor humidity to skyrocket and condensation ends up building on windows and any other cold surface. Leaks can also occur where water pipes flow upward to the coolers on the rooftops and this can cause water damage to attics, ceilings, and walls.
Water and air conditioning are very important in desert climates and so the possibility of air conditioning condensation leakage and plumbing leaks is pretty high. Air conditioners and fans are used almost constantly and in some places, hot water heaters are not needed during the majority of the year because the water is hot when it comes out of the faucet.
Most of the mold insurance claims in the deserts of the United States are caused by water damage, even though most people think that desert climates do not have enough moisture to cause mold to become an issue. With the presence of the mold that causes Valley Fever in the southwestern United States, if you live in a desert area, you should be extremely careful to make sure that water leaks in your home or business are taken care of very quickly and efficiently.
Coccidioides simmitis is a dangerous mold that lives in the western deserts of the United States and causes what has become known as “Valley Fever”. This is a skin disease that can lead to death if it is left untreated for long enough and while this mold is located in the deserts of the southwestern United States and even Mexico, it is oddly absent from the deserts of other continents such as Asia, Africa, and Australia.
The reason that mold damage can be a huge problem in areas of desert such as those of Arizona and New Mexico is that residents sometimes use “swamp heaters” to cool down their homes and offices during the most hot and dry parts of the year. Unfortunately, the downside to these will cause the indoor humidity to skyrocket and condensation ends up building on windows and any other cold surface. Leaks can also occur where water pipes flow upward to the coolers on the rooftops and this can cause water damage to attics, ceilings, and walls.
Water and air conditioning are very important in desert climates and so the possibility of air conditioning condensation leakage and plumbing leaks is pretty high. Air conditioners and fans are used almost constantly and in some places, hot water heaters are not needed during the majority of the year because the water is hot when it comes out of the faucet.
Most of the mold insurance claims in the deserts of the United States are caused by water damage, even though most people think that desert climates do not have enough moisture to cause mold to become an issue. With the presence of the mold that causes Valley Fever in the southwestern United States, if you live in a desert area, you should be extremely careful to make sure that water leaks in your home or business are taken care of very quickly and efficiently.
Water Damage Prevention Tips
The kitchen and the bathroom are two of the most important rooms in your home and if you are conscious about what makes a home valuable, then you probably understand that these are also the two rooms that can add to or subtract from your home’s value the most easily. The conditions of the bathroom and kitchen are extremely important when you go to sell your home. These two rooms are often what make or break the sale of a home. When selling a commercial building, the kitchen is typically not a factor because most do not have them and even though all commercial buildings have bathrooms of some kind, the bathroom does not usually affect the sale. The presence of a bathroom is usually enough in these buildings.
You should do whatever you can to maintain the structural integrity of these two rooms even if you do not plan on selling your home. An unfortunate event may occur and you may have to sell your home to pay for it; in life, not much is ever certain.
How do you prevent water damage to these two rooms? Keep an eye on the plumbing in both rooms, for one. Under the sinks are pipes that can sometimes begin to leak or burst completely and sometimes the vinyl on our kitchen floor or the tile on our bathroom floor is not sealed completely. This allows water underneath and will soak your floor boards. Mold can start to grow as a result of this.
The overflowing of bath tubs and kitchen sinks is also a mildly common occurrence. Maybe you forgot the water was running or you just got pre-occupied talking on the phone, but the fact is that you can leave yourself in a mess pretty quickly. Clean up the water as quickly as you can.
Install a steam vent or fan in the kitchen and bathroom if possible. This will let the steam that comes from cooking dinner or taking a bath escape the room and not cling to your ceiling. Drywall absorbs water quite well and unfortunately, mold also will start to grow on your ceiling if this steam damage continues. Installing a vent in the ceiling will possibly be one of the best investments that you can make for both of these rooms.
Also keep a check on the water line that connects to the ice maker in your refrigerator, if you have one. Water leaks from these are not uncommon and ice that melts due to a power outage can also cause water damage, especially if you are not home to take care of the spill.
You should do whatever you can to maintain the structural integrity of these two rooms even if you do not plan on selling your home. An unfortunate event may occur and you may have to sell your home to pay for it; in life, not much is ever certain.
How do you prevent water damage to these two rooms? Keep an eye on the plumbing in both rooms, for one. Under the sinks are pipes that can sometimes begin to leak or burst completely and sometimes the vinyl on our kitchen floor or the tile on our bathroom floor is not sealed completely. This allows water underneath and will soak your floor boards. Mold can start to grow as a result of this.
The overflowing of bath tubs and kitchen sinks is also a mildly common occurrence. Maybe you forgot the water was running or you just got pre-occupied talking on the phone, but the fact is that you can leave yourself in a mess pretty quickly. Clean up the water as quickly as you can.
Install a steam vent or fan in the kitchen and bathroom if possible. This will let the steam that comes from cooking dinner or taking a bath escape the room and not cling to your ceiling. Drywall absorbs water quite well and unfortunately, mold also will start to grow on your ceiling if this steam damage continues. Installing a vent in the ceiling will possibly be one of the best investments that you can make for both of these rooms.
Also keep a check on the water line that connects to the ice maker in your refrigerator, if you have one. Water leaks from these are not uncommon and ice that melts due to a power outage can also cause water damage, especially if you are not home to take care of the spill.
Salvaging Watery Electronics
People say that electronic devices are sensitive to water and water damage, but this is only half true. Most people are almost certain that if they drop an electronic device into water or spill water on one that it is pretty much toast. What they do not typically understand is the fact that it is not the water alone that does the damage to the device, but it is the electricity running through it that causes the device to become unusable. In effect, the water acts as a conductor for electricity and fries the item’s circuit board and does away with most, if not all programming that it had before.
The key to saving most electronic devices from water damage and from essentially frying the circuit board is to remove it from the source of water and remove the electric current from it as quickly as possible. This means removing the battery or the A/C adapter immediately and turning the device over to allow the water to drain out of any openings that may exist in it. Cell phones are often fairly air and water tight, but this does not mean that water cannot get into them. Remove it from the liquid in under 20 seconds and you have a pretty good shot of saving it. If you leave it in much longer, the water will eventually seep inside past the keypad and onto the circuit board inside. This might not be a big problem if your phone happens to be off at the time that you drop it in the liquid, but unfortunately, most of these incidents occur when the phone is powered on and you are talking on it.
Whatever device you happen to drop into a liquid, if possible, you should place it in a bowl of uncooked rice. It should be left there overnight or even longer until you are sure that it is completely free of moisture on the inside. Do not attempt to power on your phone or re-insert the battery before all moisture is gone. All moisture must be gone from the device to be certain that it will be fine.
Devices that are dropped into muddy or sandy water can be complicated to clean, because of the grit and dirt that can get inside. This could involve completely taking apart the phone and using alcohol to clean it. Never use water to clean anything on a cell phone, whether it is on the inside or outside.
The key to saving most electronic devices from water damage and from essentially frying the circuit board is to remove it from the source of water and remove the electric current from it as quickly as possible. This means removing the battery or the A/C adapter immediately and turning the device over to allow the water to drain out of any openings that may exist in it. Cell phones are often fairly air and water tight, but this does not mean that water cannot get into them. Remove it from the liquid in under 20 seconds and you have a pretty good shot of saving it. If you leave it in much longer, the water will eventually seep inside past the keypad and onto the circuit board inside. This might not be a big problem if your phone happens to be off at the time that you drop it in the liquid, but unfortunately, most of these incidents occur when the phone is powered on and you are talking on it.
Whatever device you happen to drop into a liquid, if possible, you should place it in a bowl of uncooked rice. It should be left there overnight or even longer until you are sure that it is completely free of moisture on the inside. Do not attempt to power on your phone or re-insert the battery before all moisture is gone. All moisture must be gone from the device to be certain that it will be fine.
Devices that are dropped into muddy or sandy water can be complicated to clean, because of the grit and dirt that can get inside. This could involve completely taking apart the phone and using alcohol to clean it. Never use water to clean anything on a cell phone, whether it is on the inside or outside.
Mold And Water In Your Two Most Important Rooms
A good meal and a good bath is something that most Americans enjoy thoroughly, but how can you enjoy either one when you’re in a room full of ugly water damage stains on the walls, floors, and ceilings? Many of these rooms often have the brown stains on the ceiling that are typical of water damage and while most people just paint over them, often the stains just keep coming back because the underlying problem has not been fixed yet.
It is probably due to a leaky roof, but what about the steam that comes off of your bath water or off of the stove when you cook dinner? These every day tasks can be just as much of a cause of water damage as a leaking roof can be, if not more so because they happen every day. At least, a bath a day comes recommended, anyway. Installing a steam vent in your bathroom for under $100 and a day’s work could possibly be one of the best investments that you can make to help safeguard the appearance and structural integrity of your kitchen and bathroom.
Make sure that you do not allow your bath tub or your kitchen sink to overflow. Sometimes we turn on the bath water and get stuck talking to a relative or a co-worker on the phone, all the while unaware that the water you wanted in your tub is pouring all over your floor. The same thing can happen when you are cooking in the kitchen or washing dishes. This can land quite a lot of water in your floor before you realize it and can do quite a bit of damage to your floor if you let it happen often.
An overflowing toilet is also a hazard, not only because of the water damage that can occur, but also due to the possible sewage content of the water when you go to flush it. If not cleaned up properly, mold can start to grow around the base of the toilet, especially if you have carpet in your bathroom. Carpet in the bathroom is a no-no.
Also avoid throwing wet dirty clothes into your bathroom floor or closet, especially if you happen to have a carpeted bathroom. You will probably forget that these wet clothes are there and throw dry ones on top of it.
This results in water damage and mold growth more often than not when the closet is not cleaned out. The best thing to do is to wash wet clothes and towels as soon as possible so they are not forgotten about or at the very least stored separately from dry dirty clothes.
It is probably due to a leaky roof, but what about the steam that comes off of your bath water or off of the stove when you cook dinner? These every day tasks can be just as much of a cause of water damage as a leaking roof can be, if not more so because they happen every day. At least, a bath a day comes recommended, anyway. Installing a steam vent in your bathroom for under $100 and a day’s work could possibly be one of the best investments that you can make to help safeguard the appearance and structural integrity of your kitchen and bathroom.
Make sure that you do not allow your bath tub or your kitchen sink to overflow. Sometimes we turn on the bath water and get stuck talking to a relative or a co-worker on the phone, all the while unaware that the water you wanted in your tub is pouring all over your floor. The same thing can happen when you are cooking in the kitchen or washing dishes. This can land quite a lot of water in your floor before you realize it and can do quite a bit of damage to your floor if you let it happen often.
An overflowing toilet is also a hazard, not only because of the water damage that can occur, but also due to the possible sewage content of the water when you go to flush it. If not cleaned up properly, mold can start to grow around the base of the toilet, especially if you have carpet in your bathroom. Carpet in the bathroom is a no-no.
Also avoid throwing wet dirty clothes into your bathroom floor or closet, especially if you happen to have a carpeted bathroom. You will probably forget that these wet clothes are there and throw dry ones on top of it.
This results in water damage and mold growth more often than not when the closet is not cleaned out. The best thing to do is to wash wet clothes and towels as soon as possible so they are not forgotten about or at the very least stored separately from dry dirty clothes.
What You Need When Removing Mold
A lot of people dream of purchasing a home that is a “fixer-upper”, but many are wary about purchasing homes that are contaminated with mold in different areas. Depending on how old the home is, what condition it is in structurally, and where it is located, it may be feasible to attempt to remediate the home yourself on top of the normal remodeling that you are going to have to do. When you have to remodel a home due to cosmetic issues, a lot of the time you have to remove building materials, anyway, so why not go the extra mile and remove the mold from the home?
Professional remediation can be expensive, but if you know what you are doing and know what equipment you will need to take up the job and complete it successfully, you could have a gem of a house in not a large amount of time.
If you do choose to remediate the home yourself instead of hiring a professional, you might want to know what you will need to do it. Hiring someone to at least assess the remediation needs of the home is advised. Some heavy duty chemicals that will kill the mold will be necessary if it is growing on non-porous surfaces like tile. Almost anything else that is contaminated by mold, such as drywall, will have to be removed and replaced. Remove any and everything from the home with mold on it; do not let it come into contact with new building materials that you have purchased.
Heavy duty trash bags and a vacuum cleaner with a HEPA filter system on it are recommended. The vacuum will remove any mold spores from the floor after the remediation job is done with.
Respirators are a must when taking on a mold remediation job. Even if the infection is not that severe, breathing mold spores is still a hazard to your health and many problems can arise. You may be allergic and not even know it. Purchase a good quality respirator if you plan on taking out any drywall or old wood. Protective clothing so the spores do not get on your skin is also a good idea. Purchase a roll of duct tape to seal the gaps between your protective suit and your shoes. Disposable protective clothing for mold remediation is available and it not very expensive. The most expensive piece of equipment you will need is the respirator and there is no reason to skimp on that part.
Professional remediation can be expensive, but if you know what you are doing and know what equipment you will need to take up the job and complete it successfully, you could have a gem of a house in not a large amount of time.
If you do choose to remediate the home yourself instead of hiring a professional, you might want to know what you will need to do it. Hiring someone to at least assess the remediation needs of the home is advised. Some heavy duty chemicals that will kill the mold will be necessary if it is growing on non-porous surfaces like tile. Almost anything else that is contaminated by mold, such as drywall, will have to be removed and replaced. Remove any and everything from the home with mold on it; do not let it come into contact with new building materials that you have purchased.
Heavy duty trash bags and a vacuum cleaner with a HEPA filter system on it are recommended. The vacuum will remove any mold spores from the floor after the remediation job is done with.
Respirators are a must when taking on a mold remediation job. Even if the infection is not that severe, breathing mold spores is still a hazard to your health and many problems can arise. You may be allergic and not even know it. Purchase a good quality respirator if you plan on taking out any drywall or old wood. Protective clothing so the spores do not get on your skin is also a good idea. Purchase a roll of duct tape to seal the gaps between your protective suit and your shoes. Disposable protective clothing for mold remediation is available and it not very expensive. The most expensive piece of equipment you will need is the respirator and there is no reason to skimp on that part.
What You Can Do to Prevent Water Damage
You might not be able to stop a hurricane or a flood from causing water damage to your home, but what you can stop are a lot of things in your home that can cause the same kind of damage, just on a smaller scale. They are quite simple and although you might forget to do them from time to time, as long as you make sure to check at least every once in a while, you (and your wallet) will be better protected against the surprise expense of water damage remediation.
One of the most frequent offenders of water damage tends to be the water heater itself. This should be located somewhere on the lowest floor of your home and in a drain pan connected to a pipe or hose that drains back into the sewer. This will make sure that even if your water heater does burst or begins to leak slowly, the water will not go into the floor, but down the drain. Most water heaters should be located in the basement and a leaky water heater down there is not going to be as much of a problem as one on the second or even third level of a home.
Make sure you have your rain gutters cleaned out at the end of autumn when the leaves have stopped falling. Your rain gutters are what keep water from simply sliding off your roof and settling around the foundation of your home. Water that collects around your home’s foundation can cause it to sink into the ground and even though this is a slow process, it can do a significant amount of damage to your home’s value. The downspouts should also be clear of any debris and water channeled away from the foundation. Soil around the base of your home should also be at such an angle that water naturally flows away from it.
Keep an eye on the pipes or hoses that go to your dishwasher and your clothes washer in the laundry room. Hoses can develop weak spots over time and develop leaks that can leave you in a huge mess, especially if you happen to be away from home at the grocery store or a friend’s when the leak begins.
Water damage can also be prevented by not forgetting that you have bath water running or water running in the kitchen sink. Overflowing sinks and tubs account for a lot of damage like this and can coat your floor with more water than you think in a very short period of time.
One of the most frequent offenders of water damage tends to be the water heater itself. This should be located somewhere on the lowest floor of your home and in a drain pan connected to a pipe or hose that drains back into the sewer. This will make sure that even if your water heater does burst or begins to leak slowly, the water will not go into the floor, but down the drain. Most water heaters should be located in the basement and a leaky water heater down there is not going to be as much of a problem as one on the second or even third level of a home.
Make sure you have your rain gutters cleaned out at the end of autumn when the leaves have stopped falling. Your rain gutters are what keep water from simply sliding off your roof and settling around the foundation of your home. Water that collects around your home’s foundation can cause it to sink into the ground and even though this is a slow process, it can do a significant amount of damage to your home’s value. The downspouts should also be clear of any debris and water channeled away from the foundation. Soil around the base of your home should also be at such an angle that water naturally flows away from it.
Keep an eye on the pipes or hoses that go to your dishwasher and your clothes washer in the laundry room. Hoses can develop weak spots over time and develop leaks that can leave you in a huge mess, especially if you happen to be away from home at the grocery store or a friend’s when the leak begins.
Water damage can also be prevented by not forgetting that you have bath water running or water running in the kitchen sink. Overflowing sinks and tubs account for a lot of damage like this and can coat your floor with more water than you think in a very short period of time.
Water and Mold in the Home
Seeing as how the kitchen and the bathroom are the two rooms that can add or subtract the most value from your home when you go to sell it, it would make quite a bit of sense to keep these two rooms in the best condition possible. These two rooms, however, are also subject to some of the most serious problems a homeowner can face: water damage and mold contamination, which tend to go hand in hand.
Keeping the shower and bath tub cleaned regularly of mildew (another word for mold) is a good idea to keep it in good condition.
Water damage occurs when water comes into contact with your floor or anything else in your home and is not cleaned up properly. It can cause floors to buckle and cause what is called “cupping” if you try to dry it out too fast, so cleaning up water spilled on hardwood floors (or in a home that has flooded) can be pretty tricky. Since mold likes to live wherever water damaged items are and wherever there is moisture, where there is water damage, mold usually follows on some level or another.
Water damage can also result from simply not having a vent installed in the bathroom or kitchen to allow the steam from bathing or cooking to escape the room. If not directed to the outside of the house through one of these vents, the steam will float up to the ceiling and soak it. Mold eventually starts to grow in these places and you will have to replace the drywall. Even if mold does not start to grow, you will probably have to replace the drywall eventually, anyway, because the paper on the front of the drywall will start to separate and sag. This is not dangerous, but it is unsightly.
Water damage also occurs when you allow a toilet or bath tub to overflow and you do not clean up the water sufficiently. If you have a vinyl or tile floor in the bathroom, this is a good thing. This creates a barrier between the water and the flood underneath, since the tile or laminate should not absorb much, if any, water. If you have carpet in your bathroom, this is a bad thing. Water will be absorbed by the carpet, the padding underneath, and depending on the amount of water on the floor, the base of the floor underneath will also be soaked. Mold will eventually start to grow if you do not make sure and get as much of the water up as possible.
In the kitchen, water damage and mold growth can be prevented by keeping a check on the plumbing going to your dishwasher and your sink. Having a vinyl and not a hardwood floor in your kitchen is the best thing, but spills need to be cleaned up as quickly as possible.
Keeping the shower and bath tub cleaned regularly of mildew (another word for mold) is a good idea to keep it in good condition.
Water damage occurs when water comes into contact with your floor or anything else in your home and is not cleaned up properly. It can cause floors to buckle and cause what is called “cupping” if you try to dry it out too fast, so cleaning up water spilled on hardwood floors (or in a home that has flooded) can be pretty tricky. Since mold likes to live wherever water damaged items are and wherever there is moisture, where there is water damage, mold usually follows on some level or another.
Water damage can also result from simply not having a vent installed in the bathroom or kitchen to allow the steam from bathing or cooking to escape the room. If not directed to the outside of the house through one of these vents, the steam will float up to the ceiling and soak it. Mold eventually starts to grow in these places and you will have to replace the drywall. Even if mold does not start to grow, you will probably have to replace the drywall eventually, anyway, because the paper on the front of the drywall will start to separate and sag. This is not dangerous, but it is unsightly.
Water damage also occurs when you allow a toilet or bath tub to overflow and you do not clean up the water sufficiently. If you have a vinyl or tile floor in the bathroom, this is a good thing. This creates a barrier between the water and the flood underneath, since the tile or laminate should not absorb much, if any, water. If you have carpet in your bathroom, this is a bad thing. Water will be absorbed by the carpet, the padding underneath, and depending on the amount of water on the floor, the base of the floor underneath will also be soaked. Mold will eventually start to grow if you do not make sure and get as much of the water up as possible.
In the kitchen, water damage and mold growth can be prevented by keeping a check on the plumbing going to your dishwasher and your sink. Having a vinyl and not a hardwood floor in your kitchen is the best thing, but spills need to be cleaned up as quickly as possible.
The Mold Remediation Equipment You Need
Depending on how much mold needs to be removed from your home, the equipment that you will need in order to finish the job will vary greatly. If you cannot afford to hire a professional and plan on doing the entire job yourself, you probably want to know the best and safest way to complete the job. If you do not take care, you should realize that kind of biological hazard that you are exposing yourself to if you do not purchase the right level of protection equipment. This can include aggravation of your asthma, emphysema, the occurrence of skin rashes, respiratory infections, and eye infections can result, among other health complications. If you are sure you want to take on this job by yourself, consider yourself warned.
Washing mold off of drywall or other porous surfaces with chemicals will work only on a superficial level. It will not kill the mold that has worked its way into the depth of the drywall and contaminated the other side in the wall. Most drywall that becomes contaminated with mold will need to be completely replaced. If the mold growth appears to be light and you catch it new, you might be able to avoid this. Purchase heavy duty trash bags that will hold all the contaminated materials that you remove from the home, but make sure to not touch contaminated items to non-contaminated items, because of the possibility of cross-contamination.
Respirators should be used when doing any kind of mold remediation job. An N-95 respirator is recommended at the very least for light jobs and for more extensive jobs, a full face respirator with a HEPA filter should be purchased. These larger jobs are usually done on older houses that are being renovated and almost completely gutted to remove contamination, but any job that requires removing drywall and throwing it away requires a respirator of some level. A full face mask will cost you around $130. Protective clothing can also be purchased, such as rubber gloves and shoes that will not allow the mold spores to come into contact with your skin.
A vacuum cleaner with a HEPA filter will also help you tremendously when you are cleaning your home after the remediation is done. This will collect all the mold spores and particles from your floor and carpet and deposit them into a receptacle that you can empty when you are done. Be careful emptying this container, though, and do not touch the contents with your bare hands. Do not stir up the contents any more than you have to in order to get them into the trash bag.
Washing mold off of drywall or other porous surfaces with chemicals will work only on a superficial level. It will not kill the mold that has worked its way into the depth of the drywall and contaminated the other side in the wall. Most drywall that becomes contaminated with mold will need to be completely replaced. If the mold growth appears to be light and you catch it new, you might be able to avoid this. Purchase heavy duty trash bags that will hold all the contaminated materials that you remove from the home, but make sure to not touch contaminated items to non-contaminated items, because of the possibility of cross-contamination.
Respirators should be used when doing any kind of mold remediation job. An N-95 respirator is recommended at the very least for light jobs and for more extensive jobs, a full face respirator with a HEPA filter should be purchased. These larger jobs are usually done on older houses that are being renovated and almost completely gutted to remove contamination, but any job that requires removing drywall and throwing it away requires a respirator of some level. A full face mask will cost you around $130. Protective clothing can also be purchased, such as rubber gloves and shoes that will not allow the mold spores to come into contact with your skin.
A vacuum cleaner with a HEPA filter will also help you tremendously when you are cleaning your home after the remediation is done. This will collect all the mold spores and particles from your floor and carpet and deposit them into a receptacle that you can empty when you are done. Be careful emptying this container, though, and do not touch the contents with your bare hands. Do not stir up the contents any more than you have to in order to get them into the trash bag.
The Bible Talks About Mold
No matter where we are or what time we have lived in, mold has always been there to make us sick and to affect our property and belongings. Insurance companies are quick to tell you that mold is not that much of a health threat and that it has been around longer than we humans have been, but this is just an argument they use so they do not have to pay your insurance claim. If your insurance claims adjuster comments that mold has been around for thousands of years and that it is not a real health threat, whatever you do, DO NOT agree with him. Dispute it. If you agree to anything he says and even remotely say that you might not have a claim, you will not have a claim and you will receive no benefits. Be steadfast when filing your claim and if necessary, you can even cite the Holy Bible to show that mold has always been a health threat to human beings and their animals.
Leviticus chapter 14:39-47 states that mold living in a building was not to be tolerated. It blatantly calls the building “diseased” or “plagued”, depending on which version of the scripture that you read. Rabbis were sent into the homes to inspect them and if they were found to be infected, the stones in the house that had mold on them were removed and taken to a landfill of sorts far away from the village. The house was sealed up for 7 days and after that, the rabbi came back to see if the mold infection returned. If it did, all the building materials for the house were torn down and thrown into the same landfill the first stones were and it was rebuilt. Any clothing that had been contaminated with mold was shown to the rabbi and if it was found to be infected, it also was taken to that landfill.
Insurance companies can dispute the ill health effects of mold on the human and animal body as much as they want to, but the proof is there. The Bible states that mold was considered a problem and a cause of disease in ancient times and we should consider it no less today. If your landlord, insurance claims adjuster, or anyone else you are trying to make a claim with insists that mold poses no real threat to you or your family, disagree with them and get the money for the repairs or relocation that you deserve.
Leviticus chapter 14:39-47 states that mold living in a building was not to be tolerated. It blatantly calls the building “diseased” or “plagued”, depending on which version of the scripture that you read. Rabbis were sent into the homes to inspect them and if they were found to be infected, the stones in the house that had mold on them were removed and taken to a landfill of sorts far away from the village. The house was sealed up for 7 days and after that, the rabbi came back to see if the mold infection returned. If it did, all the building materials for the house were torn down and thrown into the same landfill the first stones were and it was rebuilt. Any clothing that had been contaminated with mold was shown to the rabbi and if it was found to be infected, it also was taken to that landfill.
Insurance companies can dispute the ill health effects of mold on the human and animal body as much as they want to, but the proof is there. The Bible states that mold was considered a problem and a cause of disease in ancient times and we should consider it no less today. If your landlord, insurance claims adjuster, or anyone else you are trying to make a claim with insists that mold poses no real threat to you or your family, disagree with them and get the money for the repairs or relocation that you deserve.
Tell Your Insurance Adjuster About Mold in History
Getting your insurance company or your landlord to repair the mold damage to your home or apartment is almost the equivalent of trying to pull teeth without going to the dentist and receiving no anesthetic. Most insurance policies do not cover mold damage to your home unless it is due to something that your insurance policy DOES cover, such as water damage (except when said damage was due to a flood). If you have a landlord and the property that you live on is infested with mold, getting the landlord’s attention and getting him to remedy the problem is sometimes a big problem by itself, even though the property does not belong to you.
Some landlords and insurance claims adjusters will tell you that mold is not as big of a problem as some media stations and remediation companies are making it out to be, but the fact is that the proof is there. All you have to do is research for yourself and the Centers for Disease Control and even the Holy Bible itself says that mold is a serious health threat. You do not have to look very far into the Bible to see its account of what mold infested homes used to go through.
Leviticus 14:37-49 says if you suspected that your home was infested with mold you were to do what anyone else who lived during that time would do for almost any problem occurring in their lives: you would visit the rabbi. The rabbi would come to your house, inspect it, and deem it either diseased or clean. If it was deemed to be diseased or “plagued”, everything was removed from the household. These items were taken far away from town to what the Bible calls an “unclean place”. The house was closed for seven days and the rabbi returned at the end of that period to see if the infection remained. If it did, the house was torn down, the building materials taken to that unclean place, and the home re-built. Clothing deemed contaminated by the rabbi was also thrown away.
So, no matter what any landlord or insurance claims adjuster might tell you, mold is a dangerous threat to yourself and has been a problem since ancient times. Do not agree with them when they tell you that the mold is not a health threat or that the contamination is somehow your fault. Remain consistent in your effort to file your claim or to get your landlord to fix the problem.
Some landlords and insurance claims adjusters will tell you that mold is not as big of a problem as some media stations and remediation companies are making it out to be, but the fact is that the proof is there. All you have to do is research for yourself and the Centers for Disease Control and even the Holy Bible itself says that mold is a serious health threat. You do not have to look very far into the Bible to see its account of what mold infested homes used to go through.
Leviticus 14:37-49 says if you suspected that your home was infested with mold you were to do what anyone else who lived during that time would do for almost any problem occurring in their lives: you would visit the rabbi. The rabbi would come to your house, inspect it, and deem it either diseased or clean. If it was deemed to be diseased or “plagued”, everything was removed from the household. These items were taken far away from town to what the Bible calls an “unclean place”. The house was closed for seven days and the rabbi returned at the end of that period to see if the infection remained. If it did, the house was torn down, the building materials taken to that unclean place, and the home re-built. Clothing deemed contaminated by the rabbi was also thrown away.
So, no matter what any landlord or insurance claims adjuster might tell you, mold is a dangerous threat to yourself and has been a problem since ancient times. Do not agree with them when they tell you that the mold is not a health threat or that the contamination is somehow your fault. Remain consistent in your effort to file your claim or to get your landlord to fix the problem.
Selling Moldy Real Estate In Miami Gardens
If you are trying to sell a house that is contaminated with mold, you probably have a pretty short list of possible buyers. You also probably do not want to lose any of those possible buyers and you want the transaction to go as smoothly as possible. There are a few tips that you can use when selling a home like this to make sure that you get the most you can possibly get.
You need to allow the buyer to inspect the house for themselves and find out what kind of mold exists on the property. An environmental inspection clause should be included into the sales contract. If you can have the mold removed from the home at your own expense without taking a huge profit loss, you should do so. A buyer will be much more quick to actually purchase the home from you if you are completely honest about the home’s condition. You will also be able to sell the home quicker if the mold inside it is not toxic. If you can prove that it is not via mold testing kits, then the sale will go by quicker.
Again, make no attempts to cover up the mold problem in the house. Do not be nervous about it. If it is beyond your ability to remove the mold, then tell the buyer so. Explain your situation. If they are sympathetic, they may or may not be more willing to purchase from you. If they suspect you are hiding something, however, they will likely walk right out the door.
In the final sales contract, you need to have a clause that releases you and anyone involved in your end of the deal from any legal liability due to the mold. This states that the buyer already knew that the mold existed on the property and that you are no longer responsible for its presence. Include that the home was sold to the buyer in an “as-is” state and that you are not responsible for the property nor is there any warranty on it, implied or otherwise.
List all past major damage that the home has suffered due to water damage or mold so that your buyer has a complete history. Giving this information to your buyer will show them that they can trust you and that you are hiding nothing from them. This should leave you on solid ground once the final contract is signed.
You need to allow the buyer to inspect the house for themselves and find out what kind of mold exists on the property. An environmental inspection clause should be included into the sales contract. If you can have the mold removed from the home at your own expense without taking a huge profit loss, you should do so. A buyer will be much more quick to actually purchase the home from you if you are completely honest about the home’s condition. You will also be able to sell the home quicker if the mold inside it is not toxic. If you can prove that it is not via mold testing kits, then the sale will go by quicker.
Again, make no attempts to cover up the mold problem in the house. Do not be nervous about it. If it is beyond your ability to remove the mold, then tell the buyer so. Explain your situation. If they are sympathetic, they may or may not be more willing to purchase from you. If they suspect you are hiding something, however, they will likely walk right out the door.
In the final sales contract, you need to have a clause that releases you and anyone involved in your end of the deal from any legal liability due to the mold. This states that the buyer already knew that the mold existed on the property and that you are no longer responsible for its presence. Include that the home was sold to the buyer in an “as-is” state and that you are not responsible for the property nor is there any warranty on it, implied or otherwise.
List all past major damage that the home has suffered due to water damage or mold so that your buyer has a complete history. Giving this information to your buyer will show them that they can trust you and that you are hiding nothing from them. This should leave you on solid ground once the final contract is signed.
Natural Ways To Kill Mold
If you are a person that likes to use organic products and remedies, then using chemically-based mold killers in your home is possibly a taboo subject, but what else can you do? Some people say that we have become far too dependent on chemicals to do what nature can do and they have found some natural ways to kill mold that you might not have thought of before and at least one of them should be readily found in your own kitchen cabinet, even if it is a little smelly.
The most available and cheap way to kill mold without buying a bunch of chemical cleaners is simply white vinegar. This method is pretty simple to use and it does not take a lot of effort to prepare it. Vinegar kills somewhere around 80 percent of the different kinds of mold that will grow in your home and even better, if you spill white vinegar onto your carpet or furniture, there is no risk that it will discolor it. It should kill almost any kind of mold you come across in your home or business and if it does not, you probably have a more serious contamination that you should not be trying to deal with on your own, anyway. The only thing that you will need for this is a spray bottle and a funnel. Pour a sufficient amount of vinegar into the spray bottle and spray it where you find it necessary. The only drawback to this method is that it will be smelly in your house for a few hours. It will go away before the day is over.
Tea tree oil can also kill mold, but it is a bit more expensive than vinegar. You should be able to find it at most health food stores and it will kill a few more kinds of mold than vinegar will. All you have to do with this one is take two teaspoons of tea tree oil and combine it with 2 cups of water. Pour into a spray bottle and spray where you need to. Do not rinse. The shelf life on this mixture is indefinite.
The last say is almost identical to the tea tree oil method. Take about 20 drops of grapefruit seed extract and combine it with 2 cups of water. Put it into a spray bottle and spray where you need to. The good thing about this method is that there is no smell.
The most available and cheap way to kill mold without buying a bunch of chemical cleaners is simply white vinegar. This method is pretty simple to use and it does not take a lot of effort to prepare it. Vinegar kills somewhere around 80 percent of the different kinds of mold that will grow in your home and even better, if you spill white vinegar onto your carpet or furniture, there is no risk that it will discolor it. It should kill almost any kind of mold you come across in your home or business and if it does not, you probably have a more serious contamination that you should not be trying to deal with on your own, anyway. The only thing that you will need for this is a spray bottle and a funnel. Pour a sufficient amount of vinegar into the spray bottle and spray it where you find it necessary. The only drawback to this method is that it will be smelly in your house for a few hours. It will go away before the day is over.
Tea tree oil can also kill mold, but it is a bit more expensive than vinegar. You should be able to find it at most health food stores and it will kill a few more kinds of mold than vinegar will. All you have to do with this one is take two teaspoons of tea tree oil and combine it with 2 cups of water. Pour into a spray bottle and spray where you need to. Do not rinse. The shelf life on this mixture is indefinite.
The last say is almost identical to the tea tree oil method. Take about 20 drops of grapefruit seed extract and combine it with 2 cups of water. Put it into a spray bottle and spray where you need to. The good thing about this method is that there is no smell.
Subscribe to:
Posts (Atom)
