In March of 2003, Congressman John Conyers Jr. out of Michigan introduced a bill to Congress called the United States Toxic Mold Safety and Protection Act.
This Bill says that the Centers for Disease Control and the Environmental Protection agency will be responsible for examining the effects of different kinds of mold on the health of human beings and they will research and develop more accurate results of the serious problems that are presented by the presence of mold in human habitats.
This Bill will also direct the Department of Housing and Urban Development and the Environmental Protection Agency to establish a certain number of items that will constitute the conditions that will cause mold to grow indoors and will outline what can be done in order to inhibit this growth. These guidelines will not only address the causes of mold growth and what can be done to prevent it, but also the inspection, testing, and remediation techniques.
The Bill also says that you could receive tax credits for the inspection and/or removal and remediation of any mold in the home or business.
Grants will be given for the removal of mold in any and all buildings accessible by the public.
It also will create what it calls a National Toxic Mold Insurance Program that will be administered by FEMA (the Federal Emergency Management Agency) in order to protect home and business owners from any crippling financial losses, because most insurance companies do not provide insurance for mold at all or what they do provide is inadequate.
It will also necessitate the modification of building codes in local areas in order to keep the risk of mold infections in newly built homes and other buildings down.
This bill will also require mold inspections for apartment complexes and any other multi-unit residential property. Public housing is also subject to these mandatory mold inspections.
Victims of mold health complications will also be covered by Medicaid if they do not have any other health care in place at the time.
It has also authorized the establishment of different public information programs that will educate the public about the hazards of mold that is allowed to grow indoors. It is believed that an educated public is better prepared to defend itself against these hazards.
For more information, please visit http://www.house.gov/conyers/mold.htm . If you support this bill, please contact your congressman.
Thursday, January 31, 2008
Fixing A Water Damaged Laptop
You might not it, but the circuit board in your laptop and any other electronic items in your house were rinsed in clean water and dried before they were put into use? As long as the water is clean, the device will not be irreparably damaged. If something is allowed to soak in dirty water, however, with different particles and other mineral content, then the device will become damaged.
If you have a laptop that has gotten wet, the first thing to do is to turn it off immediately and remove all sources of power from it including the A/C adapter and batteries. Set these aside while you take the laptop and turn it upside down. This will stop any more liquid from seeping further into the computer.
After you do that, use paper towels or a rag to mop up the liquid that was spilled, wipe the liquid off the keyboard and the outside. Also wipe down anything else electronic nearby that got wet, too, like an external CD-ROM or external hard drive.
Disassemble the laptop (take a look at your user’s manual, too) and allow the insides to air out for at least a full day. Most people who have gone through this procedure recommend longer, especially if the liquid got further down into the computer. The best thing to do is let it sit and dry until you are confident that the interior is completely moisture-free.
If the only liquid it came into contact with was water out of your faucet, then allowing it to dry should be all that is necessary, but if it was something like soda, tea, or coffee that was spilled onto it, then you will want to clean it with some rubbing alcohol. You can use cotton swabs for this. Do not apply any heat to the device while you are cleaning it with alcohol and wait until the smell of alcohol is completely gone before you try to power it up.
Put the device back together after you are finished letting it dry or cleaning it up. Reattach the battery and see if it powers on. If it does, wait and see if it starts up as it should. If it does not, then attach the A/C adapter and plug it up. If you can turn the device on after trying this, then all you should need is a new battery. This should be pretty easy to obtain, as long as you have the money to purchase it with, either from the manufacturer or from a site like eBay.
If you have a laptop that has gotten wet, the first thing to do is to turn it off immediately and remove all sources of power from it including the A/C adapter and batteries. Set these aside while you take the laptop and turn it upside down. This will stop any more liquid from seeping further into the computer.
After you do that, use paper towels or a rag to mop up the liquid that was spilled, wipe the liquid off the keyboard and the outside. Also wipe down anything else electronic nearby that got wet, too, like an external CD-ROM or external hard drive.
Disassemble the laptop (take a look at your user’s manual, too) and allow the insides to air out for at least a full day. Most people who have gone through this procedure recommend longer, especially if the liquid got further down into the computer. The best thing to do is let it sit and dry until you are confident that the interior is completely moisture-free.
If the only liquid it came into contact with was water out of your faucet, then allowing it to dry should be all that is necessary, but if it was something like soda, tea, or coffee that was spilled onto it, then you will want to clean it with some rubbing alcohol. You can use cotton swabs for this. Do not apply any heat to the device while you are cleaning it with alcohol and wait until the smell of alcohol is completely gone before you try to power it up.
Put the device back together after you are finished letting it dry or cleaning it up. Reattach the battery and see if it powers on. If it does, wait and see if it starts up as it should. If it does not, then attach the A/C adapter and plug it up. If you can turn the device on after trying this, then all you should need is a new battery. This should be pretty easy to obtain, as long as you have the money to purchase it with, either from the manufacturer or from a site like eBay.
The Three Ways Mold Affects Us
Mold has been around since before us and has been having an effect on us since the time of Moses, yet we have only recently begun to see the true effects of mold on the human body. Mold not only affects the human body, but also the bodies of animals, such as our dogs, cats, and even our birds. We have become aware that mold is not something that we want living where we do, but a lot of us do not feel that there is much that we can do about it. Most molds fit into three different categories and are classified according to what kind of effect they have on us and our health.
Molds that are considered toxic produce what are called mycotoxins and even though these molds rarely occur where we live, they can cause all kinds of health complications and some of these can lead to death in the most serious of circumstances. Penicilliosis is native to the region of Southeast Asia and has a fairly high mortality rate without treatment, but even with treatment the number of deaths total about one in five. Another serious occurrence associated with mold is called aspergilloma and it happens when fungus begins to grow in balls inside any cavities existing in the body, particularly the lungs. Stachybotrys mold produces mycotoxins and is the most famous of the different black molds that exist and has been referenced by the media as “toxic black mold”.
Allergenic molds seem to affect people the most often and as their name implies, they usually cause some common allergy symptoms, but can be quite a nuisance. They can aggravate existing allergies or asthma, making the symptoms that a person already has become worse over time. Anti-histamines may help a small amount, but getting rid of the contamination is usually the only way to keep the symptoms from returning.
Pathogenic molds are less rare than toxic molds or allergenic molds, but they can be just as dangerous in people that have compromised immune systems such as those who are HIV-positive or has AIDS, cancer, or is recovering from surgery of any kind. The elderly, pets, and small children are also more at risk than a normal healthy adult person would be.
If you believe that mold exists in your home, you should perform some do-it-yourself mold tests and when you get the results back, hire a professional to get rid of the infestation as soon as possible.
Molds that are considered toxic produce what are called mycotoxins and even though these molds rarely occur where we live, they can cause all kinds of health complications and some of these can lead to death in the most serious of circumstances. Penicilliosis is native to the region of Southeast Asia and has a fairly high mortality rate without treatment, but even with treatment the number of deaths total about one in five. Another serious occurrence associated with mold is called aspergilloma and it happens when fungus begins to grow in balls inside any cavities existing in the body, particularly the lungs. Stachybotrys mold produces mycotoxins and is the most famous of the different black molds that exist and has been referenced by the media as “toxic black mold”.
Allergenic molds seem to affect people the most often and as their name implies, they usually cause some common allergy symptoms, but can be quite a nuisance. They can aggravate existing allergies or asthma, making the symptoms that a person already has become worse over time. Anti-histamines may help a small amount, but getting rid of the contamination is usually the only way to keep the symptoms from returning.
Pathogenic molds are less rare than toxic molds or allergenic molds, but they can be just as dangerous in people that have compromised immune systems such as those who are HIV-positive or has AIDS, cancer, or is recovering from surgery of any kind. The elderly, pets, and small children are also more at risk than a normal healthy adult person would be.
If you believe that mold exists in your home, you should perform some do-it-yourself mold tests and when you get the results back, hire a professional to get rid of the infestation as soon as possible.
Subscribe to:
Posts (Atom)
