Water damage is one of the worst things that can happen to your home that you can almost completely prevent, unless it is caused by mother nature. Floods and hurricanes are something that we can’t really prevent; all we can do is just try to prepare for it and often our preparations aren’t good enough. We should not feel bad about this, however, because nature will almost always win over any preparations that we make to try and keep her out of our homes. There are a few things that you can do to prevent water damage to your home on a smaller scale, but you will have to be diligent in your efforts if you are truly going to make it work.
Pay attention to your water heater. This and anything else in your house that uses a large amount of water is at risk of leaking out onto the floor and doing some serious damage. It should always be installed on the lowest level of your home, preferably in the basement raised up off the floor and sitting on a drain pan that is connected to a water drain in the floor. This will make sure that even if your water heater does start to leak, the water goes back into the sewer or your septic tank instead of onto your floor.
If you are worried about your dishwasher leaking, check the pipes and hoses that are leading to it first and make sure they are connected tightly and are not cracked anywhere. If you are buying a home that comes with a dishwasher already installed, you will want to check around the base of it to check for water damage. If the floor around it is discolored or if the base of the cabinet near it is warped, you might have a leaky dishwasher.
One thing that most homeowners have to do at least once a year is cleaning out the gutters that run around the roof and drain the water from the roof, through the downspout, and away from the house. These always end up collecting leaves, sticks, and other debris and if the gutters become clogged with this material, it will cause water to simply drop off the roof to the base of your house. If water saturates the ground at your home’s foundation, it will eventually cause it to sink into the ground.
Showing posts with label water damage restoration. Show all posts
Showing posts with label water damage restoration. Show all posts
Thursday, January 31, 2008
Water Damage Prevention Tips
The kitchen and the bathroom are two of the most important rooms in your home and if you are conscious about what makes a home valuable, then you probably understand that these are also the two rooms that can add to or subtract from your home’s value the most easily. The conditions of the bathroom and kitchen are extremely important when you go to sell your home. These two rooms are often what make or break the sale of a home. When selling a commercial building, the kitchen is typically not a factor because most do not have them and even though all commercial buildings have bathrooms of some kind, the bathroom does not usually affect the sale. The presence of a bathroom is usually enough in these buildings.
You should do whatever you can to maintain the structural integrity of these two rooms even if you do not plan on selling your home. An unfortunate event may occur and you may have to sell your home to pay for it; in life, not much is ever certain.
How do you prevent water damage to these two rooms? Keep an eye on the plumbing in both rooms, for one. Under the sinks are pipes that can sometimes begin to leak or burst completely and sometimes the vinyl on our kitchen floor or the tile on our bathroom floor is not sealed completely. This allows water underneath and will soak your floor boards. Mold can start to grow as a result of this.
The overflowing of bath tubs and kitchen sinks is also a mildly common occurrence. Maybe you forgot the water was running or you just got pre-occupied talking on the phone, but the fact is that you can leave yourself in a mess pretty quickly. Clean up the water as quickly as you can.
Install a steam vent or fan in the kitchen and bathroom if possible. This will let the steam that comes from cooking dinner or taking a bath escape the room and not cling to your ceiling. Drywall absorbs water quite well and unfortunately, mold also will start to grow on your ceiling if this steam damage continues. Installing a vent in the ceiling will possibly be one of the best investments that you can make for both of these rooms.
Also keep a check on the water line that connects to the ice maker in your refrigerator, if you have one. Water leaks from these are not uncommon and ice that melts due to a power outage can also cause water damage, especially if you are not home to take care of the spill.
You should do whatever you can to maintain the structural integrity of these two rooms even if you do not plan on selling your home. An unfortunate event may occur and you may have to sell your home to pay for it; in life, not much is ever certain.
How do you prevent water damage to these two rooms? Keep an eye on the plumbing in both rooms, for one. Under the sinks are pipes that can sometimes begin to leak or burst completely and sometimes the vinyl on our kitchen floor or the tile on our bathroom floor is not sealed completely. This allows water underneath and will soak your floor boards. Mold can start to grow as a result of this.
The overflowing of bath tubs and kitchen sinks is also a mildly common occurrence. Maybe you forgot the water was running or you just got pre-occupied talking on the phone, but the fact is that you can leave yourself in a mess pretty quickly. Clean up the water as quickly as you can.
Install a steam vent or fan in the kitchen and bathroom if possible. This will let the steam that comes from cooking dinner or taking a bath escape the room and not cling to your ceiling. Drywall absorbs water quite well and unfortunately, mold also will start to grow on your ceiling if this steam damage continues. Installing a vent in the ceiling will possibly be one of the best investments that you can make for both of these rooms.
Also keep a check on the water line that connects to the ice maker in your refrigerator, if you have one. Water leaks from these are not uncommon and ice that melts due to a power outage can also cause water damage, especially if you are not home to take care of the spill.
Salvaging Watery Electronics
People say that electronic devices are sensitive to water and water damage, but this is only half true. Most people are almost certain that if they drop an electronic device into water or spill water on one that it is pretty much toast. What they do not typically understand is the fact that it is not the water alone that does the damage to the device, but it is the electricity running through it that causes the device to become unusable. In effect, the water acts as a conductor for electricity and fries the item’s circuit board and does away with most, if not all programming that it had before.
The key to saving most electronic devices from water damage and from essentially frying the circuit board is to remove it from the source of water and remove the electric current from it as quickly as possible. This means removing the battery or the A/C adapter immediately and turning the device over to allow the water to drain out of any openings that may exist in it. Cell phones are often fairly air and water tight, but this does not mean that water cannot get into them. Remove it from the liquid in under 20 seconds and you have a pretty good shot of saving it. If you leave it in much longer, the water will eventually seep inside past the keypad and onto the circuit board inside. This might not be a big problem if your phone happens to be off at the time that you drop it in the liquid, but unfortunately, most of these incidents occur when the phone is powered on and you are talking on it.
Whatever device you happen to drop into a liquid, if possible, you should place it in a bowl of uncooked rice. It should be left there overnight or even longer until you are sure that it is completely free of moisture on the inside. Do not attempt to power on your phone or re-insert the battery before all moisture is gone. All moisture must be gone from the device to be certain that it will be fine.
Devices that are dropped into muddy or sandy water can be complicated to clean, because of the grit and dirt that can get inside. This could involve completely taking apart the phone and using alcohol to clean it. Never use water to clean anything on a cell phone, whether it is on the inside or outside.
The key to saving most electronic devices from water damage and from essentially frying the circuit board is to remove it from the source of water and remove the electric current from it as quickly as possible. This means removing the battery or the A/C adapter immediately and turning the device over to allow the water to drain out of any openings that may exist in it. Cell phones are often fairly air and water tight, but this does not mean that water cannot get into them. Remove it from the liquid in under 20 seconds and you have a pretty good shot of saving it. If you leave it in much longer, the water will eventually seep inside past the keypad and onto the circuit board inside. This might not be a big problem if your phone happens to be off at the time that you drop it in the liquid, but unfortunately, most of these incidents occur when the phone is powered on and you are talking on it.
Whatever device you happen to drop into a liquid, if possible, you should place it in a bowl of uncooked rice. It should be left there overnight or even longer until you are sure that it is completely free of moisture on the inside. Do not attempt to power on your phone or re-insert the battery before all moisture is gone. All moisture must be gone from the device to be certain that it will be fine.
Devices that are dropped into muddy or sandy water can be complicated to clean, because of the grit and dirt that can get inside. This could involve completely taking apart the phone and using alcohol to clean it. Never use water to clean anything on a cell phone, whether it is on the inside or outside.
Labels:
electronics,
mould,
Water,
Water Damage,
water damage restoration
Mold And Water In Your Two Most Important Rooms
A good meal and a good bath is something that most Americans enjoy thoroughly, but how can you enjoy either one when you’re in a room full of ugly water damage stains on the walls, floors, and ceilings? Many of these rooms often have the brown stains on the ceiling that are typical of water damage and while most people just paint over them, often the stains just keep coming back because the underlying problem has not been fixed yet.
It is probably due to a leaky roof, but what about the steam that comes off of your bath water or off of the stove when you cook dinner? These every day tasks can be just as much of a cause of water damage as a leaking roof can be, if not more so because they happen every day. At least, a bath a day comes recommended, anyway. Installing a steam vent in your bathroom for under $100 and a day’s work could possibly be one of the best investments that you can make to help safeguard the appearance and structural integrity of your kitchen and bathroom.
Make sure that you do not allow your bath tub or your kitchen sink to overflow. Sometimes we turn on the bath water and get stuck talking to a relative or a co-worker on the phone, all the while unaware that the water you wanted in your tub is pouring all over your floor. The same thing can happen when you are cooking in the kitchen or washing dishes. This can land quite a lot of water in your floor before you realize it and can do quite a bit of damage to your floor if you let it happen often.
An overflowing toilet is also a hazard, not only because of the water damage that can occur, but also due to the possible sewage content of the water when you go to flush it. If not cleaned up properly, mold can start to grow around the base of the toilet, especially if you have carpet in your bathroom. Carpet in the bathroom is a no-no.
Also avoid throwing wet dirty clothes into your bathroom floor or closet, especially if you happen to have a carpeted bathroom. You will probably forget that these wet clothes are there and throw dry ones on top of it.
This results in water damage and mold growth more often than not when the closet is not cleaned out. The best thing to do is to wash wet clothes and towels as soon as possible so they are not forgotten about or at the very least stored separately from dry dirty clothes.
It is probably due to a leaky roof, but what about the steam that comes off of your bath water or off of the stove when you cook dinner? These every day tasks can be just as much of a cause of water damage as a leaking roof can be, if not more so because they happen every day. At least, a bath a day comes recommended, anyway. Installing a steam vent in your bathroom for under $100 and a day’s work could possibly be one of the best investments that you can make to help safeguard the appearance and structural integrity of your kitchen and bathroom.
Make sure that you do not allow your bath tub or your kitchen sink to overflow. Sometimes we turn on the bath water and get stuck talking to a relative or a co-worker on the phone, all the while unaware that the water you wanted in your tub is pouring all over your floor. The same thing can happen when you are cooking in the kitchen or washing dishes. This can land quite a lot of water in your floor before you realize it and can do quite a bit of damage to your floor if you let it happen often.
An overflowing toilet is also a hazard, not only because of the water damage that can occur, but also due to the possible sewage content of the water when you go to flush it. If not cleaned up properly, mold can start to grow around the base of the toilet, especially if you have carpet in your bathroom. Carpet in the bathroom is a no-no.
Also avoid throwing wet dirty clothes into your bathroom floor or closet, especially if you happen to have a carpeted bathroom. You will probably forget that these wet clothes are there and throw dry ones on top of it.
This results in water damage and mold growth more often than not when the closet is not cleaned out. The best thing to do is to wash wet clothes and towels as soon as possible so they are not forgotten about or at the very least stored separately from dry dirty clothes.
What You Need When Removing Mold
A lot of people dream of purchasing a home that is a “fixer-upper”, but many are wary about purchasing homes that are contaminated with mold in different areas. Depending on how old the home is, what condition it is in structurally, and where it is located, it may be feasible to attempt to remediate the home yourself on top of the normal remodeling that you are going to have to do. When you have to remodel a home due to cosmetic issues, a lot of the time you have to remove building materials, anyway, so why not go the extra mile and remove the mold from the home?
Professional remediation can be expensive, but if you know what you are doing and know what equipment you will need to take up the job and complete it successfully, you could have a gem of a house in not a large amount of time.
If you do choose to remediate the home yourself instead of hiring a professional, you might want to know what you will need to do it. Hiring someone to at least assess the remediation needs of the home is advised. Some heavy duty chemicals that will kill the mold will be necessary if it is growing on non-porous surfaces like tile. Almost anything else that is contaminated by mold, such as drywall, will have to be removed and replaced. Remove any and everything from the home with mold on it; do not let it come into contact with new building materials that you have purchased.
Heavy duty trash bags and a vacuum cleaner with a HEPA filter system on it are recommended. The vacuum will remove any mold spores from the floor after the remediation job is done with.
Respirators are a must when taking on a mold remediation job. Even if the infection is not that severe, breathing mold spores is still a hazard to your health and many problems can arise. You may be allergic and not even know it. Purchase a good quality respirator if you plan on taking out any drywall or old wood. Protective clothing so the spores do not get on your skin is also a good idea. Purchase a roll of duct tape to seal the gaps between your protective suit and your shoes. Disposable protective clothing for mold remediation is available and it not very expensive. The most expensive piece of equipment you will need is the respirator and there is no reason to skimp on that part.
Professional remediation can be expensive, but if you know what you are doing and know what equipment you will need to take up the job and complete it successfully, you could have a gem of a house in not a large amount of time.
If you do choose to remediate the home yourself instead of hiring a professional, you might want to know what you will need to do it. Hiring someone to at least assess the remediation needs of the home is advised. Some heavy duty chemicals that will kill the mold will be necessary if it is growing on non-porous surfaces like tile. Almost anything else that is contaminated by mold, such as drywall, will have to be removed and replaced. Remove any and everything from the home with mold on it; do not let it come into contact with new building materials that you have purchased.
Heavy duty trash bags and a vacuum cleaner with a HEPA filter system on it are recommended. The vacuum will remove any mold spores from the floor after the remediation job is done with.
Respirators are a must when taking on a mold remediation job. Even if the infection is not that severe, breathing mold spores is still a hazard to your health and many problems can arise. You may be allergic and not even know it. Purchase a good quality respirator if you plan on taking out any drywall or old wood. Protective clothing so the spores do not get on your skin is also a good idea. Purchase a roll of duct tape to seal the gaps between your protective suit and your shoes. Disposable protective clothing for mold remediation is available and it not very expensive. The most expensive piece of equipment you will need is the respirator and there is no reason to skimp on that part.
Labels:
mold,
mold removal,
mold restoration,
mould,
water damage restoration
What You Can Do to Prevent Water Damage
You might not be able to stop a hurricane or a flood from causing water damage to your home, but what you can stop are a lot of things in your home that can cause the same kind of damage, just on a smaller scale. They are quite simple and although you might forget to do them from time to time, as long as you make sure to check at least every once in a while, you (and your wallet) will be better protected against the surprise expense of water damage remediation.
One of the most frequent offenders of water damage tends to be the water heater itself. This should be located somewhere on the lowest floor of your home and in a drain pan connected to a pipe or hose that drains back into the sewer. This will make sure that even if your water heater does burst or begins to leak slowly, the water will not go into the floor, but down the drain. Most water heaters should be located in the basement and a leaky water heater down there is not going to be as much of a problem as one on the second or even third level of a home.
Make sure you have your rain gutters cleaned out at the end of autumn when the leaves have stopped falling. Your rain gutters are what keep water from simply sliding off your roof and settling around the foundation of your home. Water that collects around your home’s foundation can cause it to sink into the ground and even though this is a slow process, it can do a significant amount of damage to your home’s value. The downspouts should also be clear of any debris and water channeled away from the foundation. Soil around the base of your home should also be at such an angle that water naturally flows away from it.
Keep an eye on the pipes or hoses that go to your dishwasher and your clothes washer in the laundry room. Hoses can develop weak spots over time and develop leaks that can leave you in a huge mess, especially if you happen to be away from home at the grocery store or a friend’s when the leak begins.
Water damage can also be prevented by not forgetting that you have bath water running or water running in the kitchen sink. Overflowing sinks and tubs account for a lot of damage like this and can coat your floor with more water than you think in a very short period of time.
One of the most frequent offenders of water damage tends to be the water heater itself. This should be located somewhere on the lowest floor of your home and in a drain pan connected to a pipe or hose that drains back into the sewer. This will make sure that even if your water heater does burst or begins to leak slowly, the water will not go into the floor, but down the drain. Most water heaters should be located in the basement and a leaky water heater down there is not going to be as much of a problem as one on the second or even third level of a home.
Make sure you have your rain gutters cleaned out at the end of autumn when the leaves have stopped falling. Your rain gutters are what keep water from simply sliding off your roof and settling around the foundation of your home. Water that collects around your home’s foundation can cause it to sink into the ground and even though this is a slow process, it can do a significant amount of damage to your home’s value. The downspouts should also be clear of any debris and water channeled away from the foundation. Soil around the base of your home should also be at such an angle that water naturally flows away from it.
Keep an eye on the pipes or hoses that go to your dishwasher and your clothes washer in the laundry room. Hoses can develop weak spots over time and develop leaks that can leave you in a huge mess, especially if you happen to be away from home at the grocery store or a friend’s when the leak begins.
Water damage can also be prevented by not forgetting that you have bath water running or water running in the kitchen sink. Overflowing sinks and tubs account for a lot of damage like this and can coat your floor with more water than you think in a very short period of time.
Water and Mold in the Home
Seeing as how the kitchen and the bathroom are the two rooms that can add or subtract the most value from your home when you go to sell it, it would make quite a bit of sense to keep these two rooms in the best condition possible. These two rooms, however, are also subject to some of the most serious problems a homeowner can face: water damage and mold contamination, which tend to go hand in hand.
Keeping the shower and bath tub cleaned regularly of mildew (another word for mold) is a good idea to keep it in good condition.
Water damage occurs when water comes into contact with your floor or anything else in your home and is not cleaned up properly. It can cause floors to buckle and cause what is called “cupping” if you try to dry it out too fast, so cleaning up water spilled on hardwood floors (or in a home that has flooded) can be pretty tricky. Since mold likes to live wherever water damaged items are and wherever there is moisture, where there is water damage, mold usually follows on some level or another.
Water damage can also result from simply not having a vent installed in the bathroom or kitchen to allow the steam from bathing or cooking to escape the room. If not directed to the outside of the house through one of these vents, the steam will float up to the ceiling and soak it. Mold eventually starts to grow in these places and you will have to replace the drywall. Even if mold does not start to grow, you will probably have to replace the drywall eventually, anyway, because the paper on the front of the drywall will start to separate and sag. This is not dangerous, but it is unsightly.
Water damage also occurs when you allow a toilet or bath tub to overflow and you do not clean up the water sufficiently. If you have a vinyl or tile floor in the bathroom, this is a good thing. This creates a barrier between the water and the flood underneath, since the tile or laminate should not absorb much, if any, water. If you have carpet in your bathroom, this is a bad thing. Water will be absorbed by the carpet, the padding underneath, and depending on the amount of water on the floor, the base of the floor underneath will also be soaked. Mold will eventually start to grow if you do not make sure and get as much of the water up as possible.
In the kitchen, water damage and mold growth can be prevented by keeping a check on the plumbing going to your dishwasher and your sink. Having a vinyl and not a hardwood floor in your kitchen is the best thing, but spills need to be cleaned up as quickly as possible.
Keeping the shower and bath tub cleaned regularly of mildew (another word for mold) is a good idea to keep it in good condition.
Water damage occurs when water comes into contact with your floor or anything else in your home and is not cleaned up properly. It can cause floors to buckle and cause what is called “cupping” if you try to dry it out too fast, so cleaning up water spilled on hardwood floors (or in a home that has flooded) can be pretty tricky. Since mold likes to live wherever water damaged items are and wherever there is moisture, where there is water damage, mold usually follows on some level or another.
Water damage can also result from simply not having a vent installed in the bathroom or kitchen to allow the steam from bathing or cooking to escape the room. If not directed to the outside of the house through one of these vents, the steam will float up to the ceiling and soak it. Mold eventually starts to grow in these places and you will have to replace the drywall. Even if mold does not start to grow, you will probably have to replace the drywall eventually, anyway, because the paper on the front of the drywall will start to separate and sag. This is not dangerous, but it is unsightly.
Water damage also occurs when you allow a toilet or bath tub to overflow and you do not clean up the water sufficiently. If you have a vinyl or tile floor in the bathroom, this is a good thing. This creates a barrier between the water and the flood underneath, since the tile or laminate should not absorb much, if any, water. If you have carpet in your bathroom, this is a bad thing. Water will be absorbed by the carpet, the padding underneath, and depending on the amount of water on the floor, the base of the floor underneath will also be soaked. Mold will eventually start to grow if you do not make sure and get as much of the water up as possible.
In the kitchen, water damage and mold growth can be prevented by keeping a check on the plumbing going to your dishwasher and your sink. Having a vinyl and not a hardwood floor in your kitchen is the best thing, but spills need to be cleaned up as quickly as possible.
Friday, September 28, 2007
Mold and Your Lawn
Did you know that mold can grow on your lawn and kill all the grass that you worked so hard on during the spring, summer, and fall? Well, you might have known that mold spores and fungi like mushrooms can grow in your front and backyard, but maybe you were not aware of the mold that can grow underneath the blankets of snow that fall during the winter. It is true: if snow falls on your lawn and does not melt for a long period of time, mold can start growing and kill the grass underneath. This is especially true if the grass has not stopped growing before the snow falls and if the snow is thick and wet. Another significant factor is that the ground the snow falls on top of is not frozen.
The only real symptom that you should be able to see besides the mold growth itself is the appearance of large circular patches of dead grass. These circles can be from 3 up to 12 inches wide, but in the most extreme cases of snow mold, you may not be able to distinguish one patch from the next because the mold has killed so much of your lawn.
Pink snow mold appears to be the most dangerous to your grass and it is caused by a mold called Microdochium nivale. This mold, when it matures, can be a light to a dark pink color. This is the most dangerous kind of mold to your lawn because it kills not only the blades of grass, but also the roots. This needs to be treated as soon as possible before it kills your entire lawn, if it has not already.
Gray snow mold can be caused by a few different species in a genus called Typhula and it can be anywhere from gray to white in color. These molds typically do not do more damage to the grass than affecting the blades; the roots are not typically affected.
Snow molds like to grow in temperatures that are just above freezing and in moist conditions. Even though it is called “snow” mold, it can also be caused when leaves are left covering a patch of grass for too long.
Preventing snow mold is not too difficult, but sometimes it will occur, anyway. Do not fertilize your lawn less than six weeks before cold weather starts to come in and causes the grass to stop growing. This can cause a spurt of green growth that the mold will feed on after it starts to grow underneath the snowfall.
Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.
The only real symptom that you should be able to see besides the mold growth itself is the appearance of large circular patches of dead grass. These circles can be from 3 up to 12 inches wide, but in the most extreme cases of snow mold, you may not be able to distinguish one patch from the next because the mold has killed so much of your lawn.
Pink snow mold appears to be the most dangerous to your grass and it is caused by a mold called Microdochium nivale. This mold, when it matures, can be a light to a dark pink color. This is the most dangerous kind of mold to your lawn because it kills not only the blades of grass, but also the roots. This needs to be treated as soon as possible before it kills your entire lawn, if it has not already.
Gray snow mold can be caused by a few different species in a genus called Typhula and it can be anywhere from gray to white in color. These molds typically do not do more damage to the grass than affecting the blades; the roots are not typically affected.
Snow molds like to grow in temperatures that are just above freezing and in moist conditions. Even though it is called “snow” mold, it can also be caused when leaves are left covering a patch of grass for too long.
Preventing snow mold is not too difficult, but sometimes it will occur, anyway. Do not fertilize your lawn less than six weeks before cold weather starts to come in and causes the grass to stop growing. This can cause a spurt of green growth that the mold will feed on after it starts to grow underneath the snowfall.
Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.
Subscribe to:
Posts (Atom)