When you are needing to kill and remove mold from your household, you will want and need equipment that will both make the job easier and help protect you from the dangers of mold exposure. You might feel as though you have been exposed to the mold living in your home for quite a while now and that it probably will not do you much more damage to just go through the remediation without any safety equipment, but you will be wrong about that. The mold spores in your home have not been stirred up nearly as much as they are about to be and if you are planning on performing any invasive procedures in order to get rid of the mold in your walls or in your ceiling, then the mold spore levels in your home’s air will absolutely skyrocket.
One of the first things you are going to want to purchase is a respirator of some kind. There are about three different general types that you can purchase and the respirator is the most important piece of equipment that you can buy for a mold remediation job. This is because the mold spores are in the very air that you breathe and even though gloves and protective clothing are also important, you have a fair amount of control of whether or not the mold comes into direct contact with your skin. Unless you have an allergy to the mold and require that it not get on your skin, the respirator is most important. However, if you have an allergy to mold, you should not be doing this job yourself in the first place.
An N-95 respirator is the basic respirator you will want if you are not planning on tearing apart any drywall or contaminated wallpaper. This will block about 95 percent of mold spores, dirt, and etcetera from entering your respiratory system.
If you want an extra level of protection, consider getting a half or even full-faced air purifying respirator. The good thing about these is that they do not require any training like the next level of respirator will.
Powered air purifying respirators require training and must be used following the regulations of OSHA.
Protective clothing should also be worn during the job. This can include a protective body suit, rubber gloves, and shoe coverings will be necessary, preferably made of a breathable material such as TYVEK. You should purchase a roll of tape, such as masking or duct tape, and wrap it around your wrists and ankles where there are gaps in your protective suit.
Showing posts with label ft. lauderdale. Show all posts
Showing posts with label ft. lauderdale. Show all posts
Thursday, January 31, 2008
Selling Moldy Real Estate In Miami Gardens
If you are trying to sell a house that is contaminated with mold, you probably have a pretty short list of possible buyers. You also probably do not want to lose any of those possible buyers and you want the transaction to go as smoothly as possible. There are a few tips that you can use when selling a home like this to make sure that you get the most you can possibly get.
You need to allow the buyer to inspect the house for themselves and find out what kind of mold exists on the property. An environmental inspection clause should be included into the sales contract. If you can have the mold removed from the home at your own expense without taking a huge profit loss, you should do so. A buyer will be much more quick to actually purchase the home from you if you are completely honest about the home’s condition. You will also be able to sell the home quicker if the mold inside it is not toxic. If you can prove that it is not via mold testing kits, then the sale will go by quicker.
Again, make no attempts to cover up the mold problem in the house. Do not be nervous about it. If it is beyond your ability to remove the mold, then tell the buyer so. Explain your situation. If they are sympathetic, they may or may not be more willing to purchase from you. If they suspect you are hiding something, however, they will likely walk right out the door.
In the final sales contract, you need to have a clause that releases you and anyone involved in your end of the deal from any legal liability due to the mold. This states that the buyer already knew that the mold existed on the property and that you are no longer responsible for its presence. Include that the home was sold to the buyer in an “as-is” state and that you are not responsible for the property nor is there any warranty on it, implied or otherwise.
List all past major damage that the home has suffered due to water damage or mold so that your buyer has a complete history. Giving this information to your buyer will show them that they can trust you and that you are hiding nothing from them. This should leave you on solid ground once the final contract is signed.
You need to allow the buyer to inspect the house for themselves and find out what kind of mold exists on the property. An environmental inspection clause should be included into the sales contract. If you can have the mold removed from the home at your own expense without taking a huge profit loss, you should do so. A buyer will be much more quick to actually purchase the home from you if you are completely honest about the home’s condition. You will also be able to sell the home quicker if the mold inside it is not toxic. If you can prove that it is not via mold testing kits, then the sale will go by quicker.
Again, make no attempts to cover up the mold problem in the house. Do not be nervous about it. If it is beyond your ability to remove the mold, then tell the buyer so. Explain your situation. If they are sympathetic, they may or may not be more willing to purchase from you. If they suspect you are hiding something, however, they will likely walk right out the door.
In the final sales contract, you need to have a clause that releases you and anyone involved in your end of the deal from any legal liability due to the mold. This states that the buyer already knew that the mold existed on the property and that you are no longer responsible for its presence. Include that the home was sold to the buyer in an “as-is” state and that you are not responsible for the property nor is there any warranty on it, implied or otherwise.
List all past major damage that the home has suffered due to water damage or mold so that your buyer has a complete history. Giving this information to your buyer will show them that they can trust you and that you are hiding nothing from them. This should leave you on solid ground once the final contract is signed.
Natural Ways To Kill Mold
If you are a person that likes to use organic products and remedies, then using chemically-based mold killers in your home is possibly a taboo subject, but what else can you do? Some people say that we have become far too dependent on chemicals to do what nature can do and they have found some natural ways to kill mold that you might not have thought of before and at least one of them should be readily found in your own kitchen cabinet, even if it is a little smelly.
The most available and cheap way to kill mold without buying a bunch of chemical cleaners is simply white vinegar. This method is pretty simple to use and it does not take a lot of effort to prepare it. Vinegar kills somewhere around 80 percent of the different kinds of mold that will grow in your home and even better, if you spill white vinegar onto your carpet or furniture, there is no risk that it will discolor it. It should kill almost any kind of mold you come across in your home or business and if it does not, you probably have a more serious contamination that you should not be trying to deal with on your own, anyway. The only thing that you will need for this is a spray bottle and a funnel. Pour a sufficient amount of vinegar into the spray bottle and spray it where you find it necessary. The only drawback to this method is that it will be smelly in your house for a few hours. It will go away before the day is over.
Tea tree oil can also kill mold, but it is a bit more expensive than vinegar. You should be able to find it at most health food stores and it will kill a few more kinds of mold than vinegar will. All you have to do with this one is take two teaspoons of tea tree oil and combine it with 2 cups of water. Pour into a spray bottle and spray where you need to. Do not rinse. The shelf life on this mixture is indefinite.
The last say is almost identical to the tea tree oil method. Take about 20 drops of grapefruit seed extract and combine it with 2 cups of water. Put it into a spray bottle and spray where you need to. The good thing about this method is that there is no smell.
The most available and cheap way to kill mold without buying a bunch of chemical cleaners is simply white vinegar. This method is pretty simple to use and it does not take a lot of effort to prepare it. Vinegar kills somewhere around 80 percent of the different kinds of mold that will grow in your home and even better, if you spill white vinegar onto your carpet or furniture, there is no risk that it will discolor it. It should kill almost any kind of mold you come across in your home or business and if it does not, you probably have a more serious contamination that you should not be trying to deal with on your own, anyway. The only thing that you will need for this is a spray bottle and a funnel. Pour a sufficient amount of vinegar into the spray bottle and spray it where you find it necessary. The only drawback to this method is that it will be smelly in your house for a few hours. It will go away before the day is over.
Tea tree oil can also kill mold, but it is a bit more expensive than vinegar. You should be able to find it at most health food stores and it will kill a few more kinds of mold than vinegar will. All you have to do with this one is take two teaspoons of tea tree oil and combine it with 2 cups of water. Pour into a spray bottle and spray where you need to. Do not rinse. The shelf life on this mixture is indefinite.
The last say is almost identical to the tea tree oil method. Take about 20 drops of grapefruit seed extract and combine it with 2 cups of water. Put it into a spray bottle and spray where you need to. The good thing about this method is that there is no smell.
Subscribe to:
Posts (Atom)
